Guest article written by Andy Thompson The most common modification done to any DDR/ITG machine is foam modding the L-brackets found inside of the pads. This raises the arrows to be more in line with the adjacent metal plates and brackets on the pads. Doing this can make it require…
Update 1 I’ve received a report that this method will not work if you’re using GHETT.io or BARR.io to connect your pads. Polling these devices can lead to issues connecting your hardware. Update 2 If you’re using Windows 10, use Sweetlow’s version of hidusbf instead of those in the downloads section of this…
If you’re an In The Groove or Pump It Up player, stock DDR bars are going to feel a little… lacking. DDR bars are shorter and narrower than ITG/PIU, and if you prefer height and width you can swap out your factory bars for something new. It’s unlikely you’ll find…
Stripped screws are an enormous pain to deal with. Chances are your arcade cabinet is over a decade old, which is plenty of time for screws to strip, rust, and otherwise become near impossible to remove. Fortunately there’s methods for getting these suckers out. Below are a few options to…
Tired of tripping over bulbous screws? Screws typically found on DDR machines are round, obnoxious and easy to catch your feet on. What you want is screws with a smooth head (called countersink screws) which sit flush with brackets/panels so your feet glide right over them. Project Breakdown Cost: $40…
Whether you want to replace your existing arrow panels or are building a new arcade setup, you’re gonna need plastic for the panels. Dance game arrows need to be highly resilient because, well, you’re crashing into them with your feet every day. There’s also something to be said about having…
If you’re here, chances are you’ve already gone through Arrow Panels Part 0: Restoring Polycarbonate or Arrow Panels Part 1: Making New Panels. Here you’ll learn how to create, print and apply graphics to apply to clear arrow panels. Project Breakdown Cost: $40-80 Time: 2 Hours Skill level: Medium What You Need A set…
If you’re converting a DDR/Pump machine to ITG or something else, to really complete the look and feel you’ll want some new arrow panels. If you’re looking for something cheap, you can remove the decals from existing panels and apply new ones. Be warned, this is a huge pain, takes a…
Arcade platforms face a lot of abuse leading to wear and tear on the paint. Whether your pads are chipped, scratched, or just need a refresh, giving them a new coat of paint can bring a lot of life back into the look of your cabinet. Before you begin, please note…
0